Soil Testing Equipment

Product Details:

It consists one each of : Cylindrical core cutter made of steel, 127.3 mm long and 100mm internal diameter. Steel Dolly, 25 mm high with a lip to enable it to be located on top of the core cutter. Rammer with detachable steel rod.

Additional Information:

• Delivery Time: Ready stock

Product Details:

Marshal test is extensively used in routine test programs for the paving jobs. The stability of the mix is defined as a maximum load carried by a compacted specimen at a standard test temperature of 600 °C. The flow is measured as the deformation in units of 0.25 mm between no load and maximum load carried by the specimen during stability test (flow value may also be measured by deformation units of 0.1 mm). This test attempts to get the optimum binder content for the aggregate mix type and traffic intensity. This is the test which helps us to draw Marshall Stability vs. % bitumen.
Features:-
·        A loading unit motorized capacity 5000kgf with two telescopic pillars and an adjustable cross head. Limit switches are fitted inside to control upward or downward movement of the pillars. On-off reversing switch and indicator lamps are on the front side while a hand wheel to manually move the pillars is on the right. The load frame has fixed speed of 5.08cm per minute. Operated on 230 Volts A.C
·        1 No. Compaction pedal with specimen mould holder.
·        2 Nos. Compaction Rammers, 4.5kg weight and free fall 45.7cm
·        1 No. Breaking head assembly with provision to fix flow meter.
·        3 Nos. Specimen mould 10.16cm I.D. x 7.6cm high with base plate and extension collar.
·        1 No. Kit for specimen extraction consists of one each load transfer bar, steel ball, specimen extracting plate.

Product Details:

For measuring of resistance of aggregate to crushing.
Specification: Consists of M.S. Cylindrical Container 150mm ± 0.5mm dia x 130mm to 140mm high with base plate 200 to 230 mm/sqr. X to 115mm high. Supplied complete with tamping rod.
16mm dia x 600mm long. One end rounded. And 1 no. metal
Measure 115± 0.5mm dia x 180mm high.

Product Details:

Specifications: It consists one each of : Cylindrical core cutter made of steel, 127.3 mm long and 100mm internal diameter. Steel Dolly, 25 mm high with a lip to enable it to be located on top of the core cutter. Rammer with detachable steel rod.

Product Details:

CTM/ Compression Testing Machines/ Cube Testing Machine  are the finest of their types available. Their rugged construction and extreme simplicity makes it possible for even non-technical personnel to operate them with ease and complete dependability. In particular, the portable units, which are small in dimensions, sturdy and light in weight, make quality control testing possible in areas where commercial testing facilities are not available and where the transportation of larger and much heavier machines would be difficult.
Features:-

High energy saving up to 70% compare with conventional type

Automatic stress determination and display

Overload safety protection

Dynamic calibration

Data storage approx 2000 records

CVT supplied to ensure constant voltage to digital indicator

Extremely low sound & vibration during operation

User friendly computerized system

Original genius parts cost low maintenance

Free from foundation mounting

Fully covered safety enclosed

Micro Controller based models with automatic pace rate controllers

Digital models with pace rate indicators

Analogue models

Straining at variable speeds to suit a wide range of materials.

Continuous roll autographic recorder supplied as standard to enable study of the behavior of materials

Motor driven geared shafts for quick effortless adjustment of cross-head-to facilitate rapid fixing of test specimen.

Large effective clearance between columns enables testing of standards specimens as well as structures.

Simple controls for ease of operation

Robust staining frame of an extremely rigid construction.

Safe operation ensured is means of safety devices.

Excellent performance

Longer service life

 

Product Details:

Enables the direct measurement of liquid limit to be carried out to simply and quickly, for adjusting the cone height in relation to the specimen. This apparatus is in the measurement of the penetration of bitumen.

Product Details:

The unit consists of a pressure vessel with clamp for sealing cap, rubber sealing gasket, pressure gauge calibrated in percentage moisture content 0 – 25% X 1% on the wet weight Bellstone, a counter poised balance for weighing sample, a scoop for measuring carbide reagent, a bottle for through Mixing.

Product Details:

Sand Replacement Method
Specification
Make : Bellstone
The complete apparatus consists one each of small sand pouring cylinder, 3 liter capacity, Fitted with conical funnel and shutter.
Cylinder calibrating container, Internal dia 10cm and internal depth 15 cm Fitted with flange, metal tray.

Product Details:

Casegrande method and cone-penetrometer method. Soil mechanics. BS 1377, High quality of design ensure consistency of results. Satisfies international standards. Hand operated.