Product Details:
Minimum Order Quantity | 1 Piece |
Wire Material | Copper |
Automation Grade | Semi-Automatic |
Material | MS |
Weight | 115 Kg |
Brand | Waxcon |
Max Bending Angle | 135 |
Max Inlet Wire Diameter | 0-3 mm |
Motor Speed | 1440 r/min |
Min Finish Wire Diameter | 0-1 mm |
Operating System | Semi Automatic |
Ring making machine is very useful machine to making stirrup at very low cost. This machine's production is very high and you can sell these stirrup in market and earn the money. It is a very good business to sell the stirrups.
Additional Information:
Product Details:
Capacity | 16 mm |
Wire Material | Any |
Automation Grade | Semi-Automatic |
Material | MS |
Weight | 100 |
Brand | Waxcon |
Rebar bender is efficient machine used for bend low-carbon steel including round steel, steel angles, and deformed steel bars into various shapes at construction sites and construction steel processing factory.
The new ring making Machine from WAXCON, can set different bending angles from the digital plc provided in outside of machine. There is no need to open the machine cover and do a mechanical angle setting. The PLC can accept two padel setting at a time and you also set the both padels on same angle. The PLC has also capable to run the machine in manual programming.
Operation System: Push Button and Foot PaddleProduct Details:
Driving Method | Engine |
Brand | Waxcon |
Drive Mechanism | Belt |
Cutting Material | Concrete |
Speed | 2800 r/min |
Weight | 130 kg |
Power | 9 HP |
Disc Diameter | 350mm,Also Available In 400mm,450 mm |
Model No | WV-480D |
Max. Cutting Depth | 15cm |
Dimension | 930x610x1050 mm |
Model
GFS480P
GFS480D
Weight kg
120
145
Blade Diameter mm
400-500
Driving
Manual push or Semi-automatic propelled via worm gear
Dia.of Blade Aperture mm
25.4/50
Max.cutting depth mm
180
Cutting Blade Speed rpm
2820
Engine Model
Petrol
Diesel
Engine Power Output hp
13-15
9-10
Product Details:
Material | MS |
Weight | 12.5 |
Brand | Waxcon |
Motor Speed | No |
Automation Grade | No |
Capacity | 12 mm |
Dimension | 35x12x7 |
Frequency | No |
Make | Waxcon Ventures |
Model Name/Number | WV-12 |
Number Of Wheel | No |
Phase | No |
Power Source | Manual |
Type | Manual |
Voltage | No |
Ring Size | Min 3" & Max 18" |
Bending Angle | 45, 90 and 135 |
Bar Dimensions | 4 mm to 12 mm |
Bending Range | 135 |
Bending Rebar Diameter | 12 mm |
Rebar Bending Diameter | 12 mm |
Country of Origin | Made in India |
Product Details:
Usage/Application | Bar Straightening |
Brand | Waxcon |
Diameter | 6-12 mm |
Packaging Size | Iron Crate |
Suitable For | Mild Steel |
Automation Grade | Semi Automatic |
Gauge | 12 mm |
Power Consumption | 7.5 HP |
Model |
FT14 |
|
|
Power |
7.5kw |
Range |
6-14mm |
Reducer |
350 |
Speed |
28m/min |
Size |
115*75*125cm |
Weight |
900kg |
Product Details:
Minimum Order Quantity | 1 Piece |
Cutting Disc Size | 80 mm Cutting Die |
Usage/Application | Construction |
Capacity | 28 mm for TMT |
Machine Type | Portable |
Packaging Type | Corrugated |
Discharging Volume | Depands |
Power | 3 KW |
Model Name/Number | GQ-40K |
Weight | 325 |
Warranty | 1 year |
No Load Speed | 28 Cutting in a Minute |
Features | As all |
Brand | Waxcon Ventures |
TMT Steel Bar Dia | 28 |
Stroke | 28 |
Indian Make | Yes |
Material | Ductile Iron |
After Sale Service | Onsite |
Power Consumption | 3KW |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Bending Material | MS |
Type | Digital |
Usage/Application | Stirrups |
Automation Grade | Semi-Automatic |
Brand | Waxcon |
Model Name/Number | GF-20 |
Power Source | 2.2 Kw |
Power | 200/440 v |
Rebar benger is effcient machine used for bend low-carbon steelincding round steel,steel angles, and deformed steel bars into various shapes at construction sites and construction steel processing factory.
Additional Information:
Product Details:
Power Consumption | 7.5 KW |
Brand | Waxcon |
Production Capacity | 25 Mtr/ Minute |
Model Name/Number | WV 5-12 BS |
Usage/Application | Coil Handling |
Material | MS |
Decoiling Speed | 35-80m/Min |
Phase | Three |
Machine Type | Automatic Wire Straightener and Cutter Machine |
Gross Weight | 300 Kg |
System | PLC |
Cutting Length | 300-9500mm |
Cutting Diameter | Round Bar(4-14mm),Deformed Bar(4-12mm) |
Automatic rebar straightening cutting machine is used to straightening galvanized wire or rebar,and then cut it into the needed length. It can do a prepare work for the wire mesh welding machine.So it is widely accepted to the factory who is dealing wire wires and wire mesh. Also widely used in construction area.
Features of Automatic Wire Straightener and Cutter Machine:
1. Adopt microcomputer control, automatic straightening, length, cutting.
2. Easy operation, fresh worker can use it.
3. Multi batch input both length and quantity, computer stroage information.
4. Hydraulic cutting, most accurate and silent.
5. Occupies a small area, easy installation and operates agility.
Product Details:
Model Name/Number | BV45D |
Capacity | 32 mm |
Brand | Waxcon |
Voltage | 440 V |
Power | 3 Phase |
Motor Speed | 2880r/min |
Blade Thickness | 26 mm |
Motor Power | 3 Kw |
PRODUCT DESCRIPTION *GEAR, CENTRAL GEAR, CONNECTION ROD,CRANKSHAFT, SHAFTS 1,2,3 and BLADES are made of high quality STRUCTURAL STEEL or ALLOY STEEL which undergone the required heat treatment (quenching, tempering or high frequency). *The thread type and ADJUSTABLE STOP GAUGE ensure the ACCURACY and STABILITY of cutting operations. *The separation of the connecting rod from the gear enable the machine to UNDERTAKE HEAVY-DUTY WORKS. *Adopted THIGH and RESISTENT BLADES in order to ensure high efficency with all standards of steel bars without need to change them. *The adoption of the LARGE GEAR improve the driving speed as well as the working life. The high cutting speed with the SIMPLIFIED SYSTEM increased performances of 50% more than normal cutters. |
Product Details:
Model Name/Number | GF-20 |
Bending Material | MS |
Type | Semi Automatic |
Usage/Application | Stirrups |
Automation Grade | Semi-Automatic |
Brand | Waxcon |
Weight | 120 Kg |
Material | MS |
Power | 2.2 KW |
Bending Angle | 90 And 135 Degree |
Product Details:
Bar Dimensions | 600X580X470mm |
Max Bending Radius | 32mm |
Machine Weight | 310kg |
Voltage | 220/440V |
Minimum Bending Dia | 6mm |
Power Consumption | 300 W |
PRODUCT DESCRIPTION
*GEAR, CENTRAL GEAR, CONNECTION ROD,CRANKSHAFT, SHAFTS 1,2,3 and BLADES are made of high quality STRUCTURAL STEEL or ALLOY STEEL which undergone the required heat treatment (quenching, tempering or high frequency).
*The thread type and ADJUSTABLE STOP GAUGE ensure the ACCURACY and STABILITY of cutting operations.
*The separation of the connecting rod from the gear enable the machine to UNDERTAKE HEAVY-DUTY WORKS.
Product Details:
Usage/Application | Bar Straightening |
Brand | Waxcon |
Diameter | 6-14 |
Suitable For | Mild Steel |
Automation Grade | Semi Automatic |
Power Consumption | 7.5 HP |
Production Capacity | 3 Ton |
Speed of Working | 28 M/min |
Cutting Space | 400 - 6000 Mm(Can Be Longer) |
Different Diameter Bushes for various sizes of the road.
Pressure adjusting screw for adjusting the pressure on the rod while operation.Heavy-duty roller for performing the straightening operation.
Heavy duty wheel for easy transportation of the machine.
Heavy duty wheel for easy transportation of the machine.Forward & Reverse switch for ease operation.
Product Details:
Model Name/Number | Waxcon Ventures 40 |
Capacity | 32 mm |
Brand | Other |
Cutting Range | 6-32 mm |
Voltage | 440 |
Power | 5 Hp |
Motor Speed | 2800 |
Rotation Speed Of Motor | 2880 |
Blade Thickness | 26 mm |
Motor Power | 3 kw |
Cutting Speed | 32 |
Motor Capacity | 5 Hp |
Quantity Per Pack | 1 |
Phase | 3 |
Gear Oil | 4 ltr |
Automation Grade | Semi-Automatic |
Electricity Supply | 440 |
Max Bending Radius | 360 Degree |
Weight | 380 kg |
Warranty | 1 year |
Cutting Diameter | 32 mm max |
Speed | 32 s/p |
I Deal In | New and Second Hand |
Country of Origin | Made in India |
Product Details:
Automation Grade | Automatic |
Suitable For | Mild Steel |
Usage/Application | Construction Rings / Stirrups |
Brand | Waxcon Ventures |
Cutting | 5-14 mm |
Working Speed | 48-55 m/min |
Motor Power | 11 Kw |
Diemension | 2940x800x1100mm |
Wheight | 1200 Kg |
Steel bar straightening machine is mainly applied in straightening and length cutting and applicable to cold rolling Level III Steel Bar, cold rolling plain round bar, and hot rolling coiled bar round steel.
The machine is highly automatic and pulling speed is fast. It is continuous working system and is equipped with automatic counting shutdown device. After the machine straightening, the surface of linear material shall be free from scratch. The strength loss is small and straightness accuracy is good. At the same time, the machine is easy to operate, blanking process is sample, and production efficiency is high, etc.Product Details:
Brand | WV-50C |
Usage/Application | TMT Cutting |
Material | Mild Steel |
Angle Steel | 90 x 90 x 5 mm |
Flat Steel | 90 x 15 mm |
Type of Motor | Copper Winding Motor |
Motor Rotation Speed | 2860 R/min |
Production Capacity | 2.5 ton/Ph |
Weight | 535 Kg. |
Cutting Capacity | 6-42 mm TMT Rebar |
WAXCON is engaged in presenting a wide range of bar cutting machine. This brings duty bar cutting machine with strong construction and high quality components. Rebar Cutting Machine Mainly used for construction site for flawless smooth functionality and easy operations.
It can be used efficiently to cut plain carbon steel, hot rolled steel, screw bar, flat rebar, square and angle bar which are widely used in Construction Site. We back it up with local after-sales service in INDIA and readily available spares parts. The Shearing blades are made of high tensile cutting steel with heat treatment to ensure long blade life. Its small in size, Light in weight, reliable and compact structures. These machines are portable with provisions of wheels. We back it up with local after-sales service in India and readily available spares parts all over the world.
Thick Blades to ensure accurate cutting with all kinds of steel bar (square blade or moon - shape blade option with press - spring) and blade can be replaced easily.
Clutch System is provided for your safety
Cost-effective, Compact machine body with Reliable quality
Reduce Labor cost and Low maintenance
Special tool steel cutting blades are carefully heat treated for a longer cutting Life.
Clutch System is provided for safety Purpose.
Product Details:
Minimum Order Quantity | 1 Piece |
Usage/Application | Construction |
Brand | GUTE |
Material | Mild Steel |
Model Name/Number | GQ-42D-1 |
Capacity | 42 mm |
Cutting Range | 6-36 mm |
Voltage | 440 |
Power | 3 KW |
Motor Speed | 2880 |
Blade Thickness | 26 mm |
Cutting Speed | 36 RPM |
Quantity Per Pack | 1 |
Phase | 3 |
Automation Grade | Semi-Automatic |
Gear Oil | 90 No |
Max Bending Radius | 360 Degree |
Weight | 450 |
Warranty | 12 Month |
Frequency | 50 Hz |
I Deal In | New Only |
Features (GQ42D-1):
Cutting Diameter: 6-40mm
Blade Type: moon shape
Motor Power: 3kw-2p
Cutting Speed: 48T/min
Working Disc Speed: 15r/min
Weight: 340kg
•GQ42D adopts GEARS, SHAFTS, CONNECTION ROD and BLADES made of high-quality alloyed steel with required heat treatment (quenching/ tempering/ high frequency) and 15mm thick external case to ensure reliable performances also under heavy loads and long working life.
•CONNECTION ROD has high hardness degree on attaching part with the blade, its internal side is made of tin-bronze to avoid abrasions while touching the crankshaft.
•Thick BLADES (4 edges) to ensure accurate cutting with all kinds of steel bar (square blade or moon-shape blade option with press-spring).
Product Details:
Power Consumption | 6.5 hp |
Pressure | 42 mm |
Model Name/Number | C52 |
Brand | Waxcon |
Cutting Range | 8-42 |
Voltage | 440 |
Power | 4.5 kw |
Motor Speed | 2880 |
Rotation Speed Of Motor | Anti clock wise |
Blade Thickness | 95 mm |
Motor Power | 6.5 hp |
Cutting Speed | 28 |
Phase | 3 |
Gear Oil | 90 no |
Automation Grade | Semi-Automatic |
Weight | 480 kg |
Warranty | 1 year |
After Sale Service | Yes |
I Deal In | New Only |
This is a bar cutting machine which can used in multiple construction site and its quality is very superb. Dish bar cutting machine is made from ductile iron which have very long life from other caste irons.
Product Details:
Model Name/Number | 12D-2 |
Bending Material | MS or TMT |
Capacity | 5 to 12 mm |
Type | Digital Fully Automatic |
Usage/Application | Stirrups |
Automation Grade | Automatic |
Brand | Gute |
Gross Weight | 3.5 Ton |
Traction Speed | 75-100 m/min |
BENDING DIRECTION | Both |
Single Wire | 6-12 mm |
Tensile Strength | Kg/mm245 |
Traction Wheel | Hydraulic |
Power Load | 5 Kw |
Max. Bending Speed | 1050 Degree per Second |
Accessories | With Air Compressure |
Double Wire | 6-12 mm |
MAX. BENDING ANGLE | 180 Degree |
MAX. LENGTH OF STIRRUP SIDE | 900 mm |
MIN. LENGTH OF STIRRUP SIDE | 90 mm |
Rated Power | 25 Kw |
Coil stand | Double |
LCD | Touch Panel |
We produce kinds of wire straightening and cutting machines, such as wire straightening and cutting machine, stirrup bender and welding machine. Which is R&D by our own factory! Can supply you the best service and technology.
Advantages
1. We have many experience in CNC machining service
2. We can accept small order for the beginning
3. Sample order can be finished in one week
4. Top quality guaranteed by skilled workers, managing system and status of facilities.
5. We have many long cooperation supplier. supply ONE-STOP service
6. Customized size and spec /OEM.ODM available
7. Our workers are all professional and all can speak ENGLISH
8. 100% inspect before delivery
Features (SGW12D-1):
Product Details:
Minimum Order Quantity | 1 Piece |
Max Bending Radius | 4-8 |
Bending Material | Mild Steel |
Type | Manual Ring Making Machine |
Model Name/Number | WV-6 No. |
Usage/Application | Stirrups |
Capacity | 8 mm |
Weight | 6 Kg. |
Voltage | No |
Power | No |
Phase | No |
Diameter | 8 mm |
Dimension | 15x40x18 cm |
Material | MS |
Bending Speed | Normal |
Brand | Waxcon |
Country of Origin | Made in India |
Product Details:
Usage/Application | TMT Cutting |
Material | Die Steel |
Brand | Waxcon |
Color | 4 Inch |
Blade Material | High Speed Steel |
Size | 80x80x26 |
Blade Type | Square and restangular shape |
Available Sizes | All sizes |
Shape | All |
Question | 3kg |
Bar Cutting blase set is a die which use in bar cutting machine to cut the tmt bar and other materials. It comes in pair of 02 pieces. This is made of high tempred material becaus of this the life of this material is very long.