Screed Vibrator

Product Details:

1. The largest working thickness is up to 260mm, and the longest working length reaches 28M. The working length error is less than 3 mm and the maximum working speed is up to 1M/min.
2. It uses gasoline power, and no need other external power. The power of vibration of the whole machine is large and average, and vibrate and rammer adequately.
3. With three unitization standard (3.1mm, 1.5mm, 0.76mm), and the working span can be flexibly adjusted. It is very convenient to install and uninstall.
4. Compared with the traditional simple machine, it has a higher working efficiency and continuous flatness, greatly increasing integrity of the concrete, so the concrete of the same class has a higher intensity to bear greater loads.
5. Solid and high-strong steel frame and wholly galvanized steel scraper board will not be deformed and has a longer working life.
6. Two-speed hand winch or hydraulic winch controls the walking of the whole machine. The operator can easily control the walking speed of the machine.

Product Details:

Truss Screed Vibrator
The machine is used to extract slurry ,ram and smooth the concrete floor,is new type equipment for building bridge,highway,workshop and square.The main frame is made of steel,which is firm and quake-proof.
Feature:
1. The largest working thickness is up to 260mm, and the longest working length reaches 28M. The working length error is less than 3 mm and the maximum working speed is up to 1M/min.
2. It uses gasoline power, and no need other external power. The power of vibration of the whole machine is large and average, and vibrate and rammer adequately.
3. With three unitization standard (3.1mm, 1.5mm, 0.76mm), and the working span can be flexibly adjusted. It is very convenient to install and uninstall.
4. Compared with the traditional simple machine, it has a higher working efficiency and continuous flatness, greatly increasing integrity of the concrete, so the concrete of the same class has a higher intensity to bear greater loads.
5. Solid and high-strong steel frame and wholly galvanized steel scraper board will not be deformed and has a longer working life.
6. Two-speed hand winch or hydraulic winch controls the walking of the whole machine. The operator can easily control the walking speed of the machine.
Specificate Date:
Model
ZP55
ZP90
ZP130
Compaction:
Nominal amplitude
0.6mm
Vibrating Frequency:
70Hz
Exciting Force
11KN
Working Depth
260mm
Engine:
Engine Model
HONDA GX160
HONDA GX270
HONDA GX390
Engine type
Gasoline engine,air cooled,4-stroke,OHV, Single Cylinder
Power
5.5HP
9.0HP
13.0HP
Fuel tank volume
3.6L
6L
6.5L
Lubricant
0.6L
1.1L
1.1L
Fuel consumption
230g/hp-h
230g/hp-h
230g/hp-h
Dimension:
Working Width (mm)
405mm
405mm
405mm
Standard  Single-LENGTH(mtr )
405*500mm,   405*1000mm,  405*2000mm
Length (mm)
6000mm(MAX)
9000mm(MAX)
12000mm(MAX)
Note: The chosen length of machine should be 500mm longer than real construction width.

Product Details:

Features
* Specially design, hardened aluminium blade ensuring a smoother finish than conventional screeds.
* Heavy rubber mounts to reduce the vibration level on the handle.
* Adjustable handle in height, vertical & horizontal position (optional)
* The rounded ends of the blade make it easy to go around obstacles
* The tilt-up stand keeps the engine out of concrete or off the ground obstacles
* One piece casting body easy connect to engine
* Emergency stop switch available

Product Details:

The machine is used to extract slurry ,ram and smooth the concrete floor,is new type equipment for building bridge,highway,workshop and square.The main frame is made of steel,which is firm and quake-proof.

Feature:

1. The largest working thickness is up to 260mm, and the longest working length reaches 28M. The working length error is less than 3 mm and the maximum working speed is up to 1M/min.
2. It uses gasoline power, and no need other external power. The power of vibration of the whole machine is large and average, and vibrate and rammer adequately.
3. With three unitization standard (3.1mm, 1.5mm, 0.76mm), and the working span can be flexibly adjusted. It is very convenient to install and uninstall.
4. Compared with the traditional simple machine, it has a higher working efficiency and continuous flatness, greatly increasing integrity of the concrete, so the concrete of the same class has a higher intensity to bear greater loads.
5. Solid and high-strong steel frame and wholly galvanized steel scraper board will not be deformed and has a longer working life.
6. Two-speed hand winch or hydraulic winch controls the walking of the whole machine. The operator can easily control the walking speed of the machine.